WISE-7151

Задать вопрос по оборудованию

Купить
15 340,49 руб. в т.ч. НДС: 2 556,75 руб.

В наличии на складах во всех городах:

Волгоград

Москва

Н.Новгород

Ростов-на-Дону

Санкт-Петербург

Артикул: 6049090

Характеристики

Дискретный ввод
Количество каналов	16
Тип входа	Wet Contact (Sink, Source)
Уровень логической "1"	+10 VDC ~ +50 VDC
Уровень логического "0"	+4 VDC Max
Входное сопротивление	10 k
Защита от перенапряжений	+70 VDC
Дискретный ввод, счетчики
Мах. значение	65535 (16 bits)
Max. входная частота	50 Hz
Mин. длительность импульса	10 ms
System
Процессор	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
Сторожевой таймер	Да
Интерфейсы
PoE Ethernet Port	10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2 Way Isolation
I/O	3750 Vrms
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for each terminal
EFT (IEC 61000-4-4)	+/-2 kV for Power
LED Indicators
PoE	PoE On
L1	System Running
L2	Ethernet Link/Act
L3	Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection	Да
Powered from terminal block	Yes, 12 ~ 48 VDC
Powered from PoE	Yes, IEEE 802.3af, Class1
Consumption	3.9 W
Mechanical
Dimensions (W x H x D)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-30 °C ~ +80 °C
Humidity	10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
Internal Register	=, <, >, >=, <= (value)
DI Counter	=, >, <, >=, <=(value), Change
Timer	Timeout, Not Timeout
P2P	DI, AI, DI counter, DO counter, IR
Rule Status	Enable, Disable
THEN / ELSE Actions
Internal Register	Change the value
DI Counter	Reset
Timer	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
P2P	DO(On/Off), AO, IR
Rule Status	Enable, Disable